BD Loop Goop is a tough and durable
polyurethane resin sealant designed to encapsulate, protect and
insulate inductance loops for door, gate, and parking applications.
Effectively seals out moisture and provides exceptional chemical
resistance to de-icing salts, antifreeze, gasoline, motor oil,
hydraulic brake fluid and other hydrocarbons. BD Loop Goop
remains strong, flexible and resilient in cold weather. It provides
superior adhesion to wires and saw cuts in concrete and asphalt.
Application does not require mixing or heating. Permits vehicular
traffic immediately after application (see BDLoops.com for installation
tips) with no need for lane closure. DOT APPROVED by most States.
To get the most out of your tube of Loop Goop use with a 3/16" wide saw blade, and BD Loops 3/16" Preformed Saw-Cut Loops.
Each case of BD Loop Goop comes with a Sealant Saver.
Didn't finish off that tube of loop sealant? Use the Sealant Saver to extend the life of your left over BD Loop Goop!
Sealant is expensive and we know how
frustrating it is having to through out perfectly good loop sealant
because you didn't use the full tube.
This is why we created the Sealant Saver and started including it for free with cases of BD Loop Goop.
The Sealant Saver is made with durable PVC
and is threaded to make screwing it onto tubes of BD Loop Goop easy.
This handy Sealant Saver makes an air and water tight seal on your tubes
of BD Loop Goop and dramatically extends its usable life.